2013 VICTORY VISION Structurebody Problems

THE VICTORY VISION HAS A TWO PIECE PLASTIC FRONT FENDER WHICH IS HELD TOGETHER WITH PLASTIC FASTENERS AND MOUNTED DIRECTLY TO THE METAL FORKS WITH METAL SCREWS. VIBRATIONS FRACTURED THE REAR PORTION OF THE PLASTIC FENDER AT THE POINT WHERE IT CONTACTS THE METAL FORKS, THIS CAUSED THE REAR PORTION OF THE FENDER TO FAIL, DISLODGE ITSELF AND BECOME WEDGED BETWEEN THE FORKS AND THE MAIN BODY OF THE MOTORCYCLE AFFECTING STEERING. FORTUNATELY THE SPEED WAS LOW AND THERE WAS NO ACCIDENT, HOWEVER, IF THIS INCIDENT HAD OCCURRED AT HIGHWAY SPEED OR DURING CORNERING THE RESULT COULD HAVE BEEN FATAL. PLEASE CONSIDER ADDRESSING THIS ISSUE WITH THE MANUFACTURE AS I HAVE AND THEY REFUSE TO ACCEPT RESPONSIBILITY AND FEEL IT IS NOT A DEFECT OR A SAFETY ISSUE.

ON ROUTINE INSPECTION FOUND A 1 TO 2 INCH CRACK IN THE PLASTIC PORTION OF THE FRONT FENDER. I HAVE BEEN WATCHING FOR THIS PROBLEM AFTER READING DIFFERENT VICTORY INTERNET SITES. THIS PROBLEM HAS THE POTENTIAL TO LOCK UP THE FRONT WHEEL. *TR

2013 VICTORY VISION. THE FRONT REAR SECTION OF THE FENDER (PLASTIC) CRACKS WHERE IT ATTACHES TO THE FRONT FORKS. THIS IS A WIDELY KNOWN ISSUE THAT HAS HAPPENED TO 100;S IF NOT 1,000S OF VICTORY VISIONS. POLARIS REFUSES TO REPAIR OR REPLACE, AND SUGGESTS THAT IT IS NORMAL WEAR AND TEAR. THIS IS A HUGE SAFELY ISSUE THAT MUST BE INVESTIGATED. *TR

FRONT LOWER FENDER IS FAILING. THIS IS THE ONE THAT SNAPS OFF AND LOCKS UP THE STEERING, YOU HAVE OTHER REPORTS ON THIS. INSPECTED FOR FIRST TIME AND LEFT SIDE OF FENDER IS SEPARATING FROM THE MOUNT POINT. THIS VEHICLE HAS ONLY BEEN ON THE ROAD ~5 MONTHS. PURCHASED NEW ON 08/13. BACK WHEN I WAS IN THE CAR BUSINESS, A STEERING LOCKUP CONDITION GOT RECALLED REAL QUICK. I GUESS THAT'S NOT TRUE FOR MOTORCYCLES. *TR