2011 SAAB 9-5 — Problems, Recalls & Safety Data

PREMATURE WEAR (BURN-OUT) OF THE HALOGEN-STYLE LIGHT BULBS IN EACH OF THE REAR TURN SIGNAL AND BRAKE LIGHTS (THE HALOGEN LIGHTS SERVE AS BOTH A TURN SIGNAL AND BRAKE LIGHT). THE HALOGEN LIGHTS APPEAR TO BURN OUT EVERY 4-6 MONTHS. THE BULBS ARE CREATING EXCESSIVE HEAT WITHIN THE LIGHT HOUSING AND MELTING/FUSING TO THE PLASTIC HOUSING. I BELIEVE THIS IS POTENTIALLY A FIRE RISK. THERE IS PREMATURE RUST FORMING ON THE TRUNK LID ASWELL.

PREMATURE WEAR (BURN-OUT) OF THE HALOGEN-STYLE LIGHT BULBS IN EACH OF THE REAR TURN SIGNAL AND BRAKE LIGHTS (THE HALOGEN LIGHTS SERVE AS BOTH A TURN SIGNAL AND BRAKE LIGHT). THE HALOGEN LIGHTS APPEAR TO BURN OUT EVERY 4-6 MONTHS. THE BULBS ARE CREATING EXCESSIVE HEAT WITHIN THE LIGHT HOUSING AND MELTING/FUSING TO THE PLASTIC HOUSING. I BELIEVE THIS IS POTENTIALLY A FIRE RISK. THERE IS PREMATURE RUST FORMING ON THE TRUNK LID ASWELL.

MY 2011 SAAB 9-5 IS CURRENTLY IN THE SAAB REPAIR SHOP TO HAVE THE BRAKE PEDAL REPLACED. THE BRAKE PEDAL WOULD NOT RETURN TO ITS PROPER POSITION AND WAS LOCKING THE BRAKES ON AND ALSO LOCKING THE BRAKE LIGHTS ON. IT FEELS LIKE YOU HAVE A FLAT TIRE AND THE CAR FEELS LIKE SOMETHING IS HOLDING IT BACK. IN MY CASE I RUINED THE BRAKE ROTORS AND DISCS AS THE BRAKES WERE LOCKED. THIS COULD HAVE STARTED A FIRE AND MADE THE CAR HARD TO HANDLE AND OF COURSE REDUCED THE PROPER BRAKING ABILITY. GM SHOULD PUT OUT AN IMMEDIATE SAFETY RECALL ON THIS ISSUE. THE REPAIR SHOP SAYS THEY HAVE SEEN SEVERAL CASES LIKE MINE. IT TOOK A LONG TIME FOR ME TO BE AWARE OF WHAT WAS HAPPENING. I HAVE HAD THE CAR FOR LESS THAN A YEAR AND IT DOES NOT HAPPEN ALL THE TIME. MOSTLY IN HOT AND HUMID WEATHER. THIS IS VERY DANGEROUS AND SHOULD BE FIXED RIGHT AWAY. GM SAFETY RECALL NEEDED NOW! CONTACT SAAB IM AUTOHAUS, 551 N WASHINGTON ST, FALLS CHURCH, VA 22046, AT (703) 534-0770, FOR MORE INFORMATION AND DOCUMENTATION.

TL* TAKATA RECALL. THE CONTACT OWNS A 2011 SAAB 9-5. THE CONTACT RECEIVED A RECALL NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V063000 (AIR BAGS); HOWEVER, THE PARTS FOR THE RECALL WERE NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS NOT NOTIFIED. THE CONTACT HAD NOT EXPERIENCED A FAILURE. PARTS DISTRIBUTION DISCONNECT.

SINCE 35,000 MILES, I AM CONSTANTLY GETTING NOTIFICATION ERRORS TO A REPLACE REAR TURN SIGNAL WITH EACH USAGE OF IT. SIMULTANEOUSLY, THE SIGNAL BLINKING IS OVERAGGRESSIVE, ANNOUNCING ITS MALFUNCTION TO MY FELLOW ROAD COMPANIONS AND TRAFFIC AUTHORITIES WHO THEN POLITELY TELL ME MULTIPLE TIME A DAY THAT MY TURN SIGNAL IS ABOUT TO GO OUT. ALTHOUGH I APPRECIATE THIS, I HAVE REPLACED THE BULB MULTIPLE TIMES TO RULE OUT FAULTY BULBS. WITHIN A COUPLE OF DAYS, THE ISSUE STARTS ALL OVER AGAIN. THE TURN SIGNAL BLINKS AT 160+ CLICKS PER MINUTE VERSUS THE ACCEPTED 80 CPM. THE BLUB AND SOCKET ARE MELTING TOGETHER. I HAVE LOOKED AT FORUMS AND MANY ARE HAVE THIS PROBLEM WITH THIS MAKE AND MODEL, CONSIDERING USING TURN SIGNALS IS A REQUIREMENT FOR MANEUVERS WE MAKE IN OUR VEHICLES AND TO KEEP OURSELVES, AND OTHERS, ESPECIALLY OUR PASSENGERS, OUR LOVED ONES SAFE ON THE ROAD, THIS IS SOMETHING THAT SHOULD BE RECALLED AND FIXED.