2014 RAM PROMASTER — Problems, Recalls & Safety Data

My car will not reverse when put into reverse. No symptoms prior or any warning signs. Car will roll backwards as if in neutral and the engine will rev to high rpm. Engine codes P0792 and P0736 are present after issue arised. I have found another safety recall that describes my issue exactly with regards to 2019-2021 Ram Promasters. My car 2014 Ram Promaster has the same power train as what is listed in the safety recall [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

2014 ram ProMaster traveling at approximately 10 miles an hour customer states felt like it ran over Boulder vehicle then was towed to shop upon inspection. I found a transmission mount on the driver side completely disconnected. All bolts removed must have vibrate out huge safety issue caused damage to heater hoses CV axles transmission, oil pan and shifter cable along with ground strap.

2014 ram ProMaster traveling at approximately 10 miles an hour customer states felt like it ran over Boulder vehicle then was towed to shop upon inspection. I found a transmission mount on the driver side completely disconnected. All bolts removed must have vibrate out huge safety issue caused damage to heater hoses CV axles transmission, oil pan and shifter cable along with ground strap.

I was mailed a recall notice from the manufacture a while back and was going to need to get the work completed in order to renew my CA registration. A smog cert was also needed for the renewal. I took my vehicle to McPeeks Dodge/Ram for the recall on 10/24/24. On 11/21/24 I went to get my vehicle smog checked. The smog station said that I had passed the emissions portion, but some of the monitors were still in the "not ready" state, and he could not pass the vehicle until all monitors were ready. He said that it was likely related to the recall work that was done at the dealership. I then contacted the dealership's service dept and they said that the vehicle needed to be driven a certain amount and a certain way, and for approximately $700.00 they could have one of their technicians drive it, to get it out of its current state, but they could not guarantee that it would get fixed, so I declined their offer. They explained that it needed to be driven a certain way and that it was "pretty easy", so I drove it exactly how they explained it, several times and it is still in its "not ready" state. Frustrated, since the dealership never explained this to me before the recall work was done, I reached out to Ram, but they would never return my call. After about 3 weeks of almost daily calls, I spoke to a person (who would not reveal their name of position with the company) and they said that because of the year of the vehicle and because I did not want the dealership to "attempt" to fix it, that they couldn't help me with this. Sorry, but I refuse to give my money to fix a manufacture's recall issue. This is my work vehicle that allows me to provide for my family. Please assist me in resolving this issue or please refer me to somebody that can. Thank You.

I was mailed a recall notice from the manufacture a while back and was going to need to get the work completed in order to renew my CA registration. A smog cert was also needed for the renewal. I took my vehicle to McPeeks Dodge/Ram for the recall on 10/24/24. On 11/21/24 I went to get my vehicle smog checked. The smog station said that I had passed the emissions portion, but some of the monitors were still in the "not ready" state, and he could not pass the vehicle until all monitors were ready. He said that it was likely related to the recall work that was done at the dealership. I then contacted the dealership's service dept and they said that the vehicle needed to be driven a certain amount and a certain way, and for approximately $700.00 they could have one of their technicians drive it, to get it out of its current state, but they could not guarantee that it would get fixed, so I declined their offer. They explained that it needed to be driven a certain way and that it was "pretty easy", so I drove it exactly how they explained it, several times and it is still in its "not ready" state. Frustrated, since the dealership never explained this to me before the recall work was done, I reached out to Ram, but they would never return my call. After about 3 weeks of almost daily calls, I spoke to a person (who would not reveal their name of position with the company) and they said that because of the year of the vehicle and because I did not want the dealership to "attempt" to fix it, that they couldn't help me with this. Sorry, but I refuse to give my money to fix a manufacture's recall issue. This is my work vehicle that allows me to provide for my family. Please assist me in resolving this issue or please refer me to somebody that can. Thank You.