2021 MAZDA MAZDA3 Vehicle Speed Control Problems

During the incident, the vehicle exhibited an uncontrollable malfunction—the steering wheel suddenly jerked sharply to the right while accelerating violently, leaving me unable to steer or brake effectively, the car was looking forward. The car ultimately came to a stop upon colliding with a truck parked diagonally in front of me. After impact, I observed that the front tires remained stuck in a turned-right position, with the steering wheel also locked in that position. This was not an isolated event. Multiple reports from Mazda owners describe similar experiences with their vehicles unexpectedly veering to the right and accelerating without driver input. Given these recurring reports and my own experience, I strongly suspect that a manufacturing defect—whether mechanical, electronic, or software-related—may have contributed to this accident.

Context: ADAS was not on. Lane keep assist is disabled in system settings entirely as it is dangerous. Blinkers were on, I was pulling out from parallel parking into left turn lane onto a straight road with slight incline. Car is of the Turbo trim on stock tires. Upon finishing pulling out of parallel parking spot and gassing the car, torque vectoring or some underlying collision avoidance may have phantom activated. I felt torque shift to the wrong tires, unsettling the car, and the wheel -- with no human input -- jerked to the left to force me into the lane left of intended. I applied throttle and steered right back into the correct lane, but the car was applying torque to the wrong tires and applying a left bias to the steering. Only after I got above 25mph and held straight did the car settle. Almost caused an accident...