2011 MACK CXU612 — Problems, Recalls & Safety Data

Check any vehicle history by VIN - Free vehicle history report

N/A

Safety Rating

2

Owner Complaints

0

Recalls

NO ACTIVE RECALLS

0

Service Bulletins

0

Investigations

Overview of the 2011 MACK CXU612

The 2011 MACK CXU612 has received a total of 2 safety complaints filed with the National Highway Traffic Safety Administration (NHTSA). The most commonly reported problem area is the Structureframe And Membersunderbody Shields (1 complaint).

Recalls for the 2011 MACK CXU612

There are no recalls on file with NHTSA for the 2011 MACK CXU612. No Active Recalls

Owner Complaints for the 2011 MACK CXU612

2 complaints have been filed with NHTSA for the 2011 MACK CXU612. Below is a breakdown by vehicle component.

Most Recent Complaints

#10434361 | STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS | | 23,970 miles
I AM A MAINTENANCE MECHANIC FOR A LARGE TRUCKING FIRM. ON 4 OCT 2011, I CHECKED THE TORQUE ON THE 5TH WHEEL BOLTS OF UNIT 11054 BECAUSE I COULD SEE THAT THE 5TH WHEEL WAS SLIDING ON THE FRAME. THE BOLTS WERE DEFECTIVE - YIELDING PRIOR TO REACHING THE RECOMMENDED TORQUE OF 236 FT.LB. I ADJUSTED THE TORQUE WRENCH TO 200 FT.LB., ITS LOWEST SETTING, AND COULD NOT GET ANY OF THE BOLTS TO HOLD. I REPLACED ALL TEN BOLTS WITH 5/8" GRADE 8 HARDWARE INSTEAD OF THE FACTORY 16MM 10.9 METRIC BECAUSE THAT WAS ALL WE HAD AVAILABLE. THERE WAS NO INTERFERENCE BETWEEN THE 5TH WHEEL BOLTS AND THE HUCK RIVETS ON THE FRAME RAIL. THE BOLTS WERE WEAK. *TR
#10434361 | SUSPENSION | | 23,970 miles
I AM A MAINTENANCE MECHANIC FOR A LARGE TRUCKING FIRM. ON 4 OCT 2011, I CHECKED THE TORQUE ON THE 5TH WHEEL BOLTS OF UNIT 11054 BECAUSE I COULD SEE THAT THE 5TH WHEEL WAS SLIDING ON THE FRAME. THE BOLTS WERE DEFECTIVE - YIELDING PRIOR TO REACHING THE RECOMMENDED TORQUE OF 236 FT.LB. I ADJUSTED THE TORQUE WRENCH TO 200 FT.LB., ITS LOWEST SETTING, AND COULD NOT GET ANY OF THE BOLTS TO HOLD. I REPLACED ALL TEN BOLTS WITH 5/8" GRADE 8 HARDWARE INSTEAD OF THE FACTORY 16MM 10.9 METRIC BECAUSE THAT WAS ALL WE HAD AVAILABLE. THERE WAS NO INTERFERENCE BETWEEN THE 5TH WHEEL BOLTS AND THE HUCK RIVETS ON THE FRAME RAIL. THE BOLTS WERE WEAK. *TR

Safety Rating for the 2011 MACK CXU612

NHTSA has not yet tested the 2011 MACK CXU612 in its New Car Assessment Program.

Technical Service Bulletins for the 2011 MACK CXU612

No technical service bulletins have been reported for this vehicle.

NHTSA Investigations for the 2011 MACK CXU612

There are no NHTSA defect investigations on record for this vehicle.

Other Model Years of the MACK CXU612

View all MACK CXU612 model years →

Other MACK Models

View all MACK models →

Check any vehicle history by VIN - Free vehicle history report