2019 FCCC MT45 — Problems, Recalls & Safety Data

Check any vehicle history by VIN - Free vehicle history report

N/A

Safety Rating

0

Owner Complaints

2

Recalls

ACTIVE RECALL

3

Service Bulletins

0

Investigations

Overview of the 2019 FCCC MT45

The 2019 FCCC MT45 has received a total of 0 safety complaints filed with the National Highway Traffic Safety Administration (NHTSA). There have been 8 recall campaigns affecting this vehicle, covering issues with EXTERIOR LIGHTING:BRAKE LIGHTS, SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES, SUSPENSION:FRONT:CONTROL ARM. 3 technical service bulletins have been issued by Daimler Trucks North America LLC for this model year.

Recalls for the 2019 FCCC MT45

NHTSA has recorded 8 recalls for the 2019 FCCC MT45, potentially affecting up to 22,410 vehicles.

Recall 19V371000 — EXTERIOR LIGHTING:BRAKE LIGHTS

| 9,702 vehicles affected

Defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2012-2019 Freightliner Custom Chassis MT55 and MT45 vehicles. The brake pedal clevis pin clip may rub or bend on the throttle pedal and possibly detach.

Consequence: If the clip is detaches and clevis pin slides out of position, the brake lights may fail. Loss of brake lights may mislead other drivers if they are unaware the vehicle is stopping or slowing down, which increases the risk of crash. If the pin continues to slide out further, the pedal may detach, increasing the risk of crash.

Remedy: DTNA will notify the vehicle manufacturers that purchased these chassis, and DTNA dealers will inspect the clevis pin clearance and correct it as necessary, free of charge. DTNA issued owners an interim notification on July 12, 2019. The recall began...

View full details →

Recall 19V371000 — SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES

| 9,702 vehicles affected

Defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2012-2019 Freightliner Custom Chassis MT55 and MT45 vehicles. The brake pedal clevis pin clip may rub or bend on the throttle pedal and possibly detach.

Consequence: If the clip is detaches and clevis pin slides out of position, the brake lights may fail. Loss of brake lights may mislead other drivers if they are unaware the vehicle is stopping or slowing down, which increases the risk of crash. If the pin continues to slide out further, the pedal may detach, increasing the risk of crash.

Remedy: DTNA will notify the vehicle manufacturers that purchased these chassis, and DTNA dealers will inspect the clevis pin clearance and correct it as necessary, free of charge. DTNA issued owners an interim notification on July 12, 2019. The recall began...

View full details →

Recall 18V913000 — SUSPENSION:FRONT:CONTROL ARM

| 501 vehicles affected

Defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners...

View full details →

Recall 18V913000 — STEERING:LINKAGES:TIE ROD ASSEMBLY

| 501 vehicles affected

Defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners...

View full details →

Recall 18V913000 — STEERING

| 501 vehicles affected

Defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners...

View full details →

Recall 18V913000 — SUSPENSION:FRONT:CONTROL ARM

| 501 vehicles affected

Defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners...

View full details →

Recall 18V913000 — STEERING:LINKAGES:TIE ROD ASSEMBLY

| 501 vehicles affected

Defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners...

View full details →

Recall 18V913000 — STEERING

| 501 vehicles affected

Defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners...

View full details →

Owner Complaints for the 2019 FCCC MT45

No complaints have been filed with NHTSA for the 2019 FCCC MT45.

Safety Rating for the 2019 FCCC MT45

NHTSA has not yet tested the 2019 FCCC MT45 in its New Car Assessment Program.

Technical Service Bulletins for the 2019 FCCC MT45

Daimler Trucks North America LLC has issued 3 technical service bulletins (TSBs) for the 2019 FCCC MT45. TSBs are notices sent by manufacturers to their dealers describing a known issue and the recommended repair procedure.

SBU54-048 — ELECTRICAL SYSTEM

Service Bulletin for Guidelines for Repairing or Replacing an Electrical Harness. Use the guidelines in this bulletin to determine if a damaged electrical harness should be repaired or replaced.

FCCC42001 — PARKING BRAKE:CONVENTIONAL:MECHANICAL:LINKAGE AND CABLE

Park Brake Cable Interference

ICI18-038 FL795 — EQUIPMENT

ICI18-038 FL795 ? Interim Recall Notice

NHTSA Investigations for the 2019 FCCC MT45

There are no NHTSA defect investigations on record for this vehicle.

Other Model Years of the FCCC MT45

View all FCCC MT45 model years →

Other FCCC Models

View all FCCC models →

Check any vehicle history by VIN - Free vehicle history report