2001 DAEWOO NUBIRA Engine And Engine Cooling Problems

THE CHECK ENGINE LIGHT CAME ON AND WHEN DIAGNOSED IT WAS RELATED TO A DEFECT IN THE CAMSHAFT POSITION SENSOR. I CAME TO KNOW ABOUT A RECALL REGARDING MY VEHICLE MODEL ON THE CAMSHAFT SENSOR AND TOOK IT TO A DEALERSHIP FOR REPAIR. THE DEALERSHIP SAID THE CAR WAS NOT IN THE DATABASE AND REFUSED TO DO THE REPAIR. IN THE RECALL LETTER IT SAYS THAT WITH THIS CAMSHAFT DEFECT THERE IS A RISK OF ENGINE CATCHING FIRE. *TR

RECALL 04V357000 WAS ISSUED FOR CAM SHAFT POSITION. *BF THE CONSUMER HAD THE REPAIRS DONE TO THE VEHICLE IN APRIL 2004, THE RECALL LETTER THAT THE CONSUMER RECEICED WAS DATED SEP, 2004. *TC *JB

THE CONSUMER RECEIVED THE CAMSHAFT SENOR AND THE BRAKE RECALLS. THE DEALER STATED THE VEHICLE WAS NOT INCLUDED PER THE DAEWOO COMPUTER. *JB *NM

DEALERSHIP IS CHARGING THE CONSUMER TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS. VIN NUMBER WAS INCLUDED IN THE RECALL BUT THE RECALL PART NUMBER WAS NOT INCLUDED, ALTHOUGH THE ENGINE LIGHT WAS ON. *AK

DEALERSHIP WAS CHARGING THE CONSUMER TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS. VIN WAS INCLUDED IN THE RECALL, BUT THE RECALL PART NUMBER WAS NOT INCLUDED, ALTHOUGH THE ENGINE LIGHT WAS ON. *AK

CAM SHAFT POSITION SENOR SENDING SENOR SIGNALS TO ENGINE. *BF THE CONSUMER WAS UNABLE TO LOCATE A DEALERSHIP IN THE AREA TO PERFORM THE RECALL. THE DEALERSHIP THE CONSUMER DID FIND WAS 2 1/2 HOUS AWAY FROM HOME AND THE CONSUMER DID NOT WANT TO TAKE THAT LONG TRIP AND SOMETHING HAPPENED TO THE CAR. *JB

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. NO AVAILABLE AUTHORIZED SERVICE CENTER IN AREA.*AK

SAFETY RECALL ON DAEWOO IN REGARDING TO CHECK ENGINE LIGHT. *BF THE CONSUMER RECEIVED A RECALL LETTER IN THE MAIL, HE TOOK THE VEHICLE TOOK DEALER BUT BECAUSE THE LIGHT WAS NOT ON AT THE TIME, AN ENGINE CHECK WAS NOT PERFORMED. THE CONSUMER STATED THE ENGINE LIGHT CAME ON EVERY TWO WEEKS AND STAYED LIT FOR 2 TO 3 DAYS AT A TIME. THE CONSUMER CALLED THE DEALERSHIP AND MADE AN APPOINTMENT FOR THE RECALL TO BE PERFORMED AFTER THE INSPECTION, THE CONSUMER WAS TOLD THE VEHICLE NEEDED A CAM SENSOR REPLACED AND A FUSE KIT DUE TO A MALFUNCTION. THE CONSUMER WAS TOLD THE COST WAS 200.00 EVEN THOUGH THERE WAS A RECALL THAT REFERRED TO THE VERY SAME PROBLEM. *JB

THE CHECK ENGINE LIGHT CAME ON INTERMITTENTLY. THERE WAS NO DAEWOO DEALER TO MAKE THE REPAIR. A REGULAR DEALER HAD AGREED TO MAKE THE REPAIR AT A COST TO THE CONSUMER. NHTSA RECALL 04V357000. *JB

CONSUMER RECEIVED RECALL NOTICE 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

RECALL 04V357000 CPNCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO LOCATE AN AUTHORIZED SERVICE CENTER IN HIS AREA.*AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

THE CONSUMER RECEIVED RECALL CAMPAIGN 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. THE VEHICLE WAS TAKEN TO THE DEALER FOR REPAIRS, AND THE DEALER TOLD THE CONSUMER THAT THE PARTS WOULDN'T BE IN FOR 4 OR 5 MONTHS. THE CONSUMER CALLED BACK A COUPLE OF WEEKS LATER TO INQUIRE WHETHER OR NOT ANOTHER DEALER HAD THE PARTS BUT RECEIVED NO ANSWER. *AK *SC

02 V 257 000/FMVSS 106-BRAKE HOSES AND 04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: THE CONSUMER RECEIVED TWO RECALL NOTICES AND WAS UNABLE TO LOCATE A AUTHORIZED SERVICE CENTER IN HER AREA. *JB

THE CONSUMER HAD TO PAY AN OUT OF POCKET EXPENSE FOR THE CAMSHAFT SENOR. NHTSA RECALL 04V357000. *JB

THE CAMSHAFT SENSOR RECALL, THE CONSUMER HAD TO PAY OUT OF POCKET. NHTSA RECALL 04V357000. *JB

02 V 131 001/FMVSS 201 AIR BAG DEPLOYMENT & 04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: CONSUMER RECEIVED BOTH OF THESE RECALL NOTICES AND WAS UNABLE TO LOCATE A AUTHORIZED SERVICE CENTER WITHIN HER AREA. *JB......CONSUMER CLAIMED HE DID NOT RECEIVE AIR BAG DEPLOYMENT RECALL, ONLY A BRAKE HOSE AND CMP RECALL.*AK

CONSUMER RECEIVED A RECALL NOTICE(0V4357000) CAMSHAFT POSITION SENSOR: DEALER WAS NOT IN OPERATION. *NM

CONSUMER RECEIVED NHTSA RECALL 04V357000 ON THE CAMSHAFT POSITION SENSOR. THE DEALER REFUSED TO HONOR THE RECALL BECAUSE THE CAMSHAFT MODEL NUMBER IS NOT DEFECTED EVEN THOUGH THE VIN FALL IN THE DEFECTED VEHICLES.

CONSUMER IS UNABLE TO FIND A DEALERSHIP TO REPAIR RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. *AK

CONSUMER RECEIVED RECALL 0V4357000 FOR CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER WAS REFUSED SERVICE ON THE VEHICLE FOR CAM SHAFT SENSOR. THE CHECK ENGINE LIGHT WAS ON. RECALL 04V357000.*AK

THE FRONT CONTROL ARM IS DEFECTIVE, VEHICLE MAKES A LOUD NOISE WHEN SHUTTING OFF. CAM SHAFT SENSOR RECALL 04V357000. *AK

RECALL 04V357000, CHECK ENGINE LIGHT CAME ON, AND VEHICLE STOPPED RUNNING. CAM SHAFT SENSOR WAS DEFECTIVE. NO DEALER WAS AVAILABLE TO MAKE REPAIRS. *AK THE BRAKES WERE REPAIRED TWICE. *NM

CONSUMER RECEIVED RECALLS 02 V 131 001 CONCERNING FMVSS 201 AIR BAG DEPLOYMENT, AND 04 V 357 000 REGARDING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO LOCATE ANY AUTHORIZED SERVICE CENTER IN HIS AREA THAT WERE WILLING TO HONOR THESE RECALLS.*AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. THE FOLLOWING DEALERSHIPS DIDN'T HAVE ANY MORE DAEWOO TECHNICIANS, ADDRESS: 5402 HIGH CROSSING BLVD. ADDISON , WI 53718, PHONE: 608-246-7800, AND BOUCHER DAEWOO OF MADISON EAST, ADDRESS: 5402 HIGH CROSSING BLVD, MADISON , WI 53718, PHONE: 608-246-7800. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR FROM THE MANUFACTURER AND WENT TO THE DAEWOO DEALERSHIP WHERE THE VEHICLE WAS PURCHASED. THE SERVICE DEPARTMENT WANTED TO CHARGE CONSUMER $40.00 FOR A DIAGNOSTIC TEST JUST TO BE SURE THAT THE DEFECT WAS AS DESCRIBED IN THE RECALL NOTICE. CURRENTLY, DEALERSHIP WAS TELLING CONSUMER THAT PARTS WILL NOT BE AVAILABLE FOR 3 TO 4 WEEKS. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE, THE PHONE PROVIDED IN THE RECALL LETTER WAS NOT WORKING. *AK

DEALERSHIPS REFUSED TO HONOR CAM SHAFT POSITION SENSOR RECALL 04V357000 BECAUSE THEY WERE NO LONGER HONORING THIS MODEL WARRANTY WORK. THIS WAS THE SECOND DEALER CALLED.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO SERVICE CENTER. *AK

CHECK ENGINE LIGHT IS ON. VEHICLE CANNOT GO OVER 40 MPH. NO DEALER TO REPAIR THE CAM SHAFT SENSOR RECALL 04V357000. *AK

THE CHECK ENGINE LIGHT WAS ON. THE RECALL LETTER STATED THE CAMSHAFT WAS DEFECTIVE. THE DEALER STATED THE ID NUMBER FOR THE PART DID NOT MATCH AND CHARGED THE CONSUMER FOR THE REPAIR. CAMSHAFT SENSOR 04V357000. *JB

04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: THE CONSUMER WAS UNABLE TO FIND AN AUTHORIZED DEALER IN THE AREA TO PERFORM THE RECALL. *JB

THE CONSUMER RECEIVED, NHTSA RECALL CAMPAIGN LETTER #04V357000 REGARDING THE CAMSHAFT POSITION SENSOR. THE DEALERSHIP WERE FAR AWAY FROM THE CONSUMERS HOME. *JB *TC

CONSUMER RECEIVED A RECALL NOTICE(04V357000) FOR THE CAM POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE IN THE AREA OF NORTH DAKOTA.*AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. THE ONLY DEALERSHIP IN THAT AREA INDICATED TO THE CONSUMER, SORRY WE DON'T DO BUSINESS WITH DAEWOO ANY MORE. ROBERTS DAEWOO. ADDRESS: 625 HWY 70 EAST, HICKORY, NC 28602 , PONE: 828-324-2700 . *AK

WHILE DRIVING ENGINE WARNING LIGHT ILLUMINATED UNTIL THE VEHICLE SHUT OFF. DEALERSHIP WAS NOTIFIED, BUT DID NOT RESOLVE THE PROBLEM.*AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING THE CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE. THE PHONE PROVIDED IN THE LETTER IWAS NOT WORKING. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. COMPANY WAS OUT BUSINESS. NO DEALERSHIP WAS AVAILABLE. THE PHONE PROVIDED IN THE LETTER WAS NOT WORKING. *AK

CONSUMER RECEIVED NHTSA RECALL04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WERE AVAILABLE. THE PHONE PROVIDED IN THE LETTER WAS NOT WORKING. *AK

CHECK ENGINE LIGHT WAS ON. THERE WERE NO DEALERS TO MAKE THE REPAIRS ON THE CAMSHAFT RECALL 04V357000. *AK

CONSUMER RECEIVED RECALL NOTICE 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CHECK ENGINE LIGHT WAS ON. THERE WERE NO DEALERS IN THE AREA TO PERFORM CAMSHAFT SENSOR RECALL 04V357000 REPAIRS. *AK

CONSUMER RECEIVED RECALL NOTICE 04V357000 CONCERNING CAM SHIFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED A RECALL NOTICE 04V357000 CONCERNING CAM SHAFT POSITION SENOR. DEALER WAS NOT IN OPERATION. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING THE CRANK SHAFT POSITION SENSOR. COMPANY WAS OUT BUSINESS. NO DEALERSHIP WAS AVAILABLE, THE PHONE PROVIDED IN THE LETTER WAS NOT WORKING. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *AK