1998 CHEVROLET CORVETTE Service Brakes Problems

I own a 1998 Chevrolet Corvette. The EBCM can have an issue. Complains of traction control, ABS braking and AH active handling. This can cause issues when driving with no ABS active. I have seen numerous complaints about this issue here and on various forums. Unfortunately the part needed to correct the issue is no longer available and for some reason cannot be repaired. Used parts are costly (2K or more) and no guarantee they work. GM should provide replacement part or work around. If not available they should offer total car buy backs for a fare price depending on condition or offer an exchange for a corvette that can be repaired.

ABS/TRACTION CONTROL LIGHTS ON. WENT TO DEALER AND NO PART IS AVAILABLE TO MAKE THE REPAIR. SO I HAVE NO ABS OR TRACION CONTROL ON MY CAR PART NO 9367071 & 12530740

PARKING BRAKES DON'T WORK.

TL* THE CONTACT OWNS A 1998 CHEVROLET CORVETTE. THE CONTACT STATED WHILE DRIVING APPROXIMATELY 60 MPH ATTEMPTING TO ENGAGE THE BRAKES, THE BRAKE PEDAL WOULD PULSATE. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC FOR DIAGNOSTIC TESTING. THE TECHNICIAN DIAGNOSED THAT THE FRONT BRAKES AND ROTORS NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE VEHICLE WAS REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 150,000.

TL* THE CONTACT OWNS A 1998 CHEVROLET CORVETTE. THE CONTACT STATED WHILE AT A COMPLETE STOP, THE VEHICLE ACCELERATED UNEXPECTEDLY WITH THE ILLUMINATION OF THE POSI TRACTION AND ABS WARNING INDICATORS. THE BRAKE PEDAL WAS DEPRESSED AND THE VEHICLE FAILED TO SLOW DOWN UNTIL THE GEAR WAS SHIFTED INTO THE PARK POSITION. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER WHERE THE STEERING HARNESS AND AN UNKNOWN PART RELATED TO THE FRONT ENGINE WAS REPLACED. THE FAILURE PERSISTED AND THE VEHICLE WAS TAKEN TO A DIFFERENT DEALER WHERE THE MASTER COMPUTER AND ALTERNATOR WERE BOTH REPLACED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 71,722.

APPROXIMATELY 3 YEARS AGO MY 1998 C5 CORVETTE COUPE EXPERIENCED FAULT CODES AND WARNING LIGHTS ASSOCIATED WITH A FAILURE OR FAILURES WITHIN THE ELECTRONIC BRAKE TRACTION CONTROL MODULE (EBTCM). I TRIED TO REPLACE THE ELECTRONIC MODULE THAT MOUNTS TO THE ABS PUMP A FEW TIMES WITH USED MODULES AND THE PROBLEM WAS NEVER RESOLVED. LAST SUMMER I PUT THE CORVETTE INTO THE SERVICE CENTER AT THE LOCAL CHEVY DEALERSHIP AND TOLD THEM TO FIX THE PROBLEM AND CLEAR THE FAULT CODES. WHEN I PICKED UP THE CAR AND STARTED IT THE CODES AND WARNING LIGHT WAS STILL THERE. I ENQUIRED WHY AND WAS TOLD THAT GM NO LONGER SUPPORTS THE ABS/TRACTION CONTROL MODULE FOR THE OLDER CORVETTES. I WAS TOLD BY THE CHEVY "CERTIFIED" TECHNICIAN THAT THE CAR WAS SAFE TO DRIVE WITHOUT ABS AND TRACTION CONTROL. I ADDED THAT IT WAS SAFE AS LONG AS I DIDN'T DRIVE IN...

I KNOW I AM NOT THE 1ST TO REPORT THIS SAME CONDITION. YOU SHOULD HAVE SEVERAL 100 OF US IF NOT 1000'S, WHO ARE EXPERIENCING ABS FAILURES WHICH AFFECTS THE TRACTION CONTROL MODULES (ALSO CALLED ELECTRONIC BRAKE TRACTION CONTROL MODEL)( EBTCM) ON ALL CORVETTE'S MADE FROM 97-2007 THAT I AM AWARE OF. WE CONTINUE TO EXPERIENCE THE ABS & TRACTION CONTROL MODULE FAILURES AND GM SAYS THEY CAN'T FIX IT DUE TO LACK OF PARTS. MY VEHICLE DOES NOT HAVE THE ACTIVE HANDLING SYSTEM BUT OTHERS DO AND THIS HAS TO BE A SAFETY CONCERN FOR THE NHTSA. YOU HAVE 40,000 HIGH PERFORMANCE CORVETTE'S ON THE ROAD WITH ELECTRONIC CONTROLS THAT DO NOT WORK FOR THE ANTI-LOCK BRAKE SYSTEMS, TRACTION CONTROL, AND ACTIVE HANDLING FOR STABILITY CONTROL AND NO SPARE PARTS AVAILABLE FROM GM? HOW CAN THAT BE? THERE IS A 10% CHANCE AFTERMARKET COMPANIES WHO SAY THEY CAN REPAIR...

SITTING IDLE, ALL WARNING LIGHTS ILLUMINATE ON DASH BOARD, IN DASH DISPLAY SHOWS"SERVICE ENGINE SOON". MADE IT HOME WHEN SMOKE BELLOWED FROM UNDER HOOD. ABS MODULE SHORTED OUT AND STARTED FIRE AT MODULE AND WIRING HARNESS. THANKFULLY, I AM A BODY MAN AND KNEW WHAT TO DO BY DISCONNECTING THE BATTERY. IF MY WIFE WAS DRIVING THERE WOULD HAVE BEEN A FULL BLOWN FIRE. MY RESEARCH SHOWS, THIS IS A VERY COMMON PROBLEM WITH THE 1997 TO 2000 CORVETTE WITH J 04 ACTIVE BRAKE CONTROL OPTION. NOT ONLY IS THERE A FIRE POSSIBILITY, THE PART MANUFACTURE HAS GONE OUT OF BUSINESS IN 2007, THE MODULE OR HARNESS AND NO LONGER AVAILABLE. DUE TO THE FIRE HISTORY OF THIS PART, NO AFTERMARKET COMPANY'S WILL REBUILD THIS UNIT. ZERO AVAILABLE NEW, VERY LIMITED USED (YARDS WILL ONLY SELL A TOTALED CORVETTE AS A ROLLING CHASIS). THIS LEAVES US CORVETTE OWNERS PURCHASED FOR...

THE ABS/TRACTION CONTROL MALFUNCTION AND WILL NOT ENABLE. *TR

I SLAMMED ON MY BRAKES AND MY ABS BRAKES FAILED, MY CAR COULD NOT STOP AND I NARROWLY MISSED HITTING THE CAR IN FRONT OF ME. I HAD MY CAR DIAGNOSED AT JOHN L SULLIVAN CHEVROLET AND WAS TOLD THAT MY ABS "ELECTRONIC BRAKE CONTROL MODULE" FAILED AND THERE ARE NO REPLACEMENT PARTS AVAILABLE FROM THE DEALER OR AFTERMARKET. I WENT ONLINE TO THE CORVETTEFORUM.COM AND FOUND OUT THAT THERE ARE HUNDREDS OF CORVETTE OWNERS WITH THE SAME PROBLEM. THERE ARE NO FIXES FOR THIS. I COULDN'T BELIEVE THAT GM COULD NOT ADDRESS THIS ISSUE AND HAVE PARTS AVAILABLE. THIS PROBLEM INCLUDES CORVETTES MANUFACTURED FROM 1998-2004. I WOULD LIKE TO KNOW WHAT IT TAKES TO MAKE THIS A RECALL ISSUE. THIS IS A SERIOUS ISSUE AND I'M AFRAID TO LET MY FAMILY DRIVE MY CAR. *TR

DRIVING DOWN A 4 LANE CITY STREET A CHILD CHASING HIS BALL RAN OUT IN FRONT OF MY CAR. I SLAMMED ON THE BRAKES NOT KNOWING THAT THE ABS SYSTEM WAS NOT WORKING, IT CAUSED ME TO LOSE CONTROL OF THE CAR AND SPIN OUT INTO ONCOMING TRAFFIC. I CALLED THE LOCAL CHEVROLET DEALER TO FIND OUT ABOUT REPAIRS AND WAS TOLD THAT THE ABC CONTROL MODULE IS NO LONGER AVAILABLE AND IT CAN NOT BE REBUILT OR REPAIRED. WHAT IM I GOING TO DO NOW WITH AN UNSAFE CAR. THERE ARE THOUSANDS OF THESE CARS WITH THE SAME PROBLEM. *JS