2011 ALTEC DIGGER DERRICK — Problems, Recalls & Safety Data
N/A
Safety Rating
0
Owner Complaints
11
Recalls
0
Service Bulletins
0
Investigations
Overview of the 2011 ALTEC DIGGER DERRICK
The 2011 ALTEC DIGGER DERRICK has received a total of 0 safety complaints filed with the National Highway Traffic Safety Administration (NHTSA). There have been 12 recall campaigns affecting this vehicle, covering issues with STRUCTURE:FRAME AND MEMBERS, EQUIPMENT:MECHANICAL:WINCH, EQUIPMENT:OTHER:LABELS.
Recalls for the 2011 ALTEC DIGGER DERRICK
NHTSA has recorded 12 recalls for the 2011 ALTEC DIGGER DERRICK, potentially affecting up to 21,169 vehicles.
Recall 25V562000 — STRUCTURE:FRAME AND MEMBERS
| 903 vehicles affected
Defect: Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
Consequence: A cable step that fails during use increases the risk of injury.
Remedy: Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters...
View full details →Recall 23V636000 — EQUIPMENT:MECHANICAL:WINCH
| 53 vehicles affected
Defect: Altec Industries, Inc. (Altec) is recalling certain 2004-2023 DL42 and DL45 Digger Derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
Consequence: An uncontrolled load falling increases the risk of injury to personnel or others nearby.
Remedy: Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed October 6, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3113.
View full details →Recall 19V365000 — EQUIPMENT:OTHER:LABELS
| 1,036 vehicles affected
Defect: Altec Industries Inc. (Altec) is recalling certain 2009-2019 DL/DM, DL/DMB, DH, D/2/3/4, and DC Digger Derrick vehicles. The slope indicator placard card may falsely indicate that the unit could be used without leveling on a 5 degree slope.
Consequence: An operator may improperly set up the unit, making the unit unstable, thus increasing the risk of injury.
Remedy: Altec will notify owners, and issue CSN 719 to owners, instructing them to remove the incorrect placards, free of charge. The recall began July 2, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is...
View full details →Recall 19V127000 — EQUIPMENT
| 14,389 vehicles affected
Defect: Altec Industries, Inc (Altec) is recalling certain 2003-2019 Altec DL/DM, DL/DMB, and DC Digger Derrick vehicles. The pedestal tube welds may crack over time.
Consequence: Unrepaired cracks may result in failure of the pedestal and uncontrolled movement increasing the risk of injury.
Remedy: Altec will notify owners and will provide repairs as necessary and a reinforcing kit. The recall began April 3, 2019. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 713.
View full details →Recall 18V791000 — ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
| 331 vehicles affected
Defect: Altec Industries, Inc. (Altec) is recalling certain 2008-2018 Altec AC18, AC23, AC26, AC30 and AC38 Cranes and D2B, D3A, D4A/B, DL42B, DT65 and DT80 Digger Derrick vehicles. The wiring on the 12V circuit from the chassis battery to the Power Distribution Module (PDM) may be insufficiently sized.
Consequence: The insufficiently sized wire may overheat, increasing the risk of fire.
Remedy: Altec will notify owners, and dealers will replace the wiring to the PDM, with a larger wire and/or replace the circuit breaker, free of charge. The recall began January 9, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's...
View full details →Recall 18V791000 — ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
| 331 vehicles affected
Defect: Altec Industries, Inc. (Altec) is recalling certain 2008-2018 Altec AC18, AC23, AC26, AC30 and AC38 Cranes and D2B, D3A, D4A/B, DL42B, DT65 and DT80 Digger Derrick vehicles. The wiring on the 12V circuit from the chassis battery to the Power Distribution Module (PDM) may be insufficiently sized.
Consequence: The insufficiently sized wire may overheat, increasing the risk of fire.
Remedy: Altec will notify owners, and dealers will replace the wiring to the PDM, with a larger wire and/or replace the circuit breaker, free of charge. The recall began January 9, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's...
View full details →Recall 14V503000 — ELECTRICAL SYSTEM:12V/24V/48V BATTERY
| 51 vehicles affected
Defect: Altec Industries, Inc. (Altec) is recalling certain model year 2000-2013 Aerial Device and Digger Derrick trucks, equipped with Sure Power Battery Equalizers containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.
Consequence: Once electrically conductive, the material is capable of melting and burning, increasing the risk of a fire.
Remedy: Altec will notify owners, and dealers will replace any affected battery equalizer, free of charge. The recall is expected to begin in September 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 603.
View full details →Recall 13V636000 — EQUIPMENT
| 661 vehicles affected
Defect: Altec Industries Inc. (Altec) is recalling certain model year 2009-2013 DT80, and model year 2011-2013 D2, D3 and D4 digger derrick models manufactured June 2009 through November 2013. The fasteners that hold the bracket for the feeder tube (the telescopic hydraulic tube that supplies pump flow to the auger) may become loose allowing the feeder tube to fall.
Consequence: A falling feeder tube increases the risk of injury to people nearby.
Remedy: Altec will notify owners, and Altec service centers will install an upgraded feeder tube bracket and mounting hardware, free of charge. The recall began on February 19, 2014. Owners may contact Altec at 1-877-462-5832. Altec's number for this recall is...
View full details →Recall 13V141000 — EQUIPMENT
| 1,057 vehicles affected
Defect: Altec Industries, Inc (Altec) is recalling certain model year 2007-2012 DC, and DL/DM Digger Derrick utility trucks, equipped with boom tip winches using Tulsa Winch Group (formerly Gear Products) winch drums. In the affected vehicles, the winch drum could deform or fracture.
Consequence: If the winch fails while in use, it could cause personal injury.
Remedy: Altec will notify owners and dealers will replace the winch drum, free of charge. The recall began on June 10, 2013. Altec's recall campaign number is CSN 574.
View full details →Recall 12V423000 — EQUIPMENT
| 2,193 vehicles affected
Defect: Altec Industries, Inc. is recalling certain model year 2011-2012 Digger Derrick vehicles equipped with a PENGO digger extension shaft. A defect in the base material at the weld joint may result in a stress fracture through the applied weld of the drive hub to the hex bar material.
Consequence: The stress fracture could cause the extension shaft to separate from the drive hub when digging, increasing the risk of personal injury and/or property damage.
Remedy: Altec will notify owners, and will inspect the PENGO digger extension shaft and, as necessary, replace the shaft, free of charge. The safety recall began on October 12, 2012. Owners may contact Altec Industries at 1-877-462-5832.
View full details →Recall 11V600000 — EQUIPMENT:ELECTRICAL
| 129 vehicles affected
Defect: ALTEC IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 UTILITY VEHICLES EQUIPPED WITH SURE POWER BATTERY SEPARATOR DEVICES, PART NUMBER 16511893 (MODEL 1314) OR 16512967 (MODEL 1315). THE BATTERY SEPARATOR CAN OVERHEAT.
Consequence: OVERHEATING OF THE BATTERY SEPARATOR CAN RESULT IN SMOKE AND POSSIBLE FIRE.
Remedy: ALTEC WILL NOTIFY OWNERS AND REPLACE THE BATTER SEPARATORS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 11, 2012. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.
View full details →Recall 11V451000 — EQUIPMENT
| 35 vehicles affected
Defect: ALTEC IS RECALLING CERTAIN MODEL YEAR 2011 DL/DM SERIES, D4000A, AND DB37 DIGGER DERRICK SERVICE UTILITY VEHICLES MANUFACTURED FROM JANUARY 2011 THROUGH APRIL 2011, EQUIPPED WITH PQ SINGLE AXIS BOOM CONTROLLERS. THE MECHANICAL INTERLOCK (LOCK OUT) MAY NOT OPERATE PROPERLY.
Consequence: IF THE CONTROL INTERLOCK DOES NOT FUNCTION PROPERLY, THE CONTROL HANDLE CAN BE ACCIDENTLY SHIFTED CAUSING MOVEMENT OF THE UNIT, POSSIBLY RESULTING IN SERIOUS INJURY OR DEATH.
Remedy: ALTEC WILL NOTIFY OWNERS, AND ALTEC DEALERS WILL REPLACE THE HAND CONTROLLERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 7, 2011. OWNERS MAY CONTACT ALTEC AT 1-877-GO-ALTEC (1-877-462-5832) FOR MORE INFORMATION.
View full details →Owner Complaints for the 2011 ALTEC DIGGER DERRICK
No complaints have been filed with NHTSA for the 2011 ALTEC DIGGER DERRICK.
Safety Rating for the 2011 ALTEC DIGGER DERRICK
NHTSA has not yet tested the 2011 ALTEC DIGGER DERRICK in its New Car Assessment Program.
Technical Service Bulletins for the 2011 ALTEC DIGGER DERRICK
No technical service bulletins have been reported for this vehicle.
NHTSA Investigations for the 2011 ALTEC DIGGER DERRICK
There are no NHTSA defect investigations on record for this vehicle.
Other Model Years of the ALTEC DIGGER DERRICK
- 2006 ALTEC DIGGER DERRICK — 0 complaints
- 2007 ALTEC DIGGER DERRICK — 0 complaints
- 2008 ALTEC DIGGER DERRICK — 0 complaints
- 2009 ALTEC DIGGER DERRICK — 0 complaints
- 2010 ALTEC DIGGER DERRICK — 0 complaints
- 2011 ALTEC DIGGER DERRICK (current)
- 2012 ALTEC DIGGER DERRICK — 0 complaints
- 2013 ALTEC DIGGER DERRICK — 0 complaints
- 2014 ALTEC DIGGER DERRICK — 0 complaints
- 2015 ALTEC DIGGER DERRICK — 0 complaints
- 2016 ALTEC DIGGER DERRICK — 0 complaints
Other ALTEC Models
- ALTEC AT200A — 3 total complaints
- ALTEC AERIAL DEVICE — 1 total complaint
- ALTEC 4300 — 0 total complaints
- ALTEC 470 KNUCKLE BOOM CRANE — 0 total complaints
- ALTEC 4700 — 0 total complaints
- ALTEC 4900 — 0 total complaints
- ALTEC 7300 — 0 total complaints
- ALTEC 7400 — 0 total complaints