Technical Service Bulletin TSB 23-2244 — 2023 FORD ESCAPE HYBRID
POWER TRAIN
Bulletin Details
| TSB ID | TSB 23-2244 |
| Manufacturer | |
| Vehicle | 2023 FORD ESCAPE HYBRID |
| Component | POWER TRAIN |
| Communication Date |
Bulletin Summary
Some 2020-2023 Escape hybrid vehicles equipped with a 2.5L (FHEV) full hybrid electric vehicle powertrain and 4-wheel drive (4WD) may exhibit a grinding or rubbing noise while braking at or below 10 mph (16 km/h) from the front of the vehicle. This may be due to an inadequate gap between the driveshaft and the heat shield. To correct this condition, follow the Service Procedure to diagnose and position the heat shield away from the driveshaft.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2023 FORD ESCAPE HYBRID
SSM 53352
UNKNOWN OR OTHER
TSB 23-2420
POWER TRAIN
SSM 52230
ELECTRICAL SYSTEM
SSM 52201
ENGINE AND ENGINE COOLING
SSM 52190
POWER TRAIN