Technical Service Bulletin TheWrench1Feb.21 — 2020 HONDA GL1800
STEERING
Bulletin Details
| TSB ID | TheWrench1Feb.21 |
| Manufacturer | |
| Vehicle | 2020 HONDA GL1800 |
| Component | STEERING |
| Communication Date |
Bulletin Summary
The Wrench - When performing the Service Bulletin GL1800 #1- Loose Handlebar Repair on 2018 GL 1800, or removing the Steering Bridge to adjust the upper steering stem nut on any 2018 and newer GL1800, the left rear tie rod bolt needs to be held by a 14 mm open wrench to prevent the bolt from turning when loosening the 17 mm upper nut. If the bolt is not supported, the rubber bushing will be damaged, which will then need to be replaced. Bushing damage will not be covered by warranty.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2020 HONDA GL1800
Wrench_Jan-Mar20
ELECTRICAL SYSTEM
Wrench_Jan-Mar20
POWER TRAIN