Technical Service Bulletin TB1909 — 2019 KTM 690 ENDURO R
ENGINE AND ENGINE COOLING
Bulletin Details
| TSB ID | TB1909 |
| Manufacturer | |
| Vehicle | 2019 KTM 690 ENDURO R |
| Component | ENGINE AND ENGINE COOLING |
| Communication Date |
Bulletin Summary
It has been determined that during the engine assembly process that the locking plate screws shown in Fig.1 for the camshaft and balancer shaft possibly were not mounted correctly on the following models: 2019 690 Enduro R and 2019 690 SMC R. These two screws must be removed, cleaned, have Loctiteî 243⢠applied and then tightened to a torque of 6 Nm to prevent any possible loosening of the screws.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.