Technical Service Bulletin SSM 51812 — 2021 FORD BRONCO SPORT
STEERING
Bulletin Details
| TSB ID | SSM 51812 |
| Manufacturer | |
| Vehicle | 2021 FORD BRONCO SPORT |
| Component | STEERING |
| Communication Date |
Bulletin Summary
Some 2020-2022 Escape/Corsair, 2021-2022 Bronco Sport, and 2022 Maverick vehicles built on or before 23-Mar-2022 may exhibit a hard, stiff, and/or difficult to turn condition due to a lack of power steering assist during engine start-up with U3000 diagnostic trouble codes (DTCs) stored in the PSCM. Using the latest version of Ford Diagnosis and Repair System (FDRS) tool, select and run the PSCM - Reset the Power Steering Control Module (PSCM) application. After PSCM reset, perform an ignition cycle. Update the PSCM to the latest software level using FDRS tool. If the U3000 DTC returns, continue with diagnostics and repair direction using Workshop Manual (WSM), Section 211-02 > Power Steering > Diagnosis and Testing. For claiming, use causal part 3C529 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2021 FORD BRONCO SPORT
TSB 25-2428
ENGINE
24N08 -S1
UNKNOWN OR OTHER
TSB 25-2001
UNKNOWN OR OTHER
SSM 52704
UNKNOWN OR OTHER
22N15
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
TSB 23-2298
EQUIPMENT
SSM 51823
UNKNOWN OR OTHER
SSM 51799
POWER TRAIN
SSM 51799
ENGINE AND ENGINE COOLING
SSM 51724
VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM