Technical Service Bulletin SSM 50659 — 2018 FORD TRANSIT CONNECT
BACK OVER PREVENTION
Bulletin Details
| TSB ID | SSM 50659 |
| Manufacturer | |
| Vehicle | 2018 FORD TRANSIT CONNECT |
| Component | BACK OVER PREVENTION |
| Communication Date |
Bulletin Summary
Some 2017-2022 Transit Connect/Transit/Explorer vehicles equipped with a fleet telematics global positioning system (GPS) and a connected human machine interface (HMI) radio (CHR) may experience concerns with rear camera zoom, wrong map matching or a blank display. If these concerns are present, it's likely to be a software issue caused by the audio control module (ACM) that can be remedied by updating the ACM software to the latest level with the FDRS application. If the update does not resolve the concern, refer to the Workshop Manual. For claiming, use causal part 18C869 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2018 FORD TRANSIT CONNECT
TSB 22-2114
EQUIPMENT
TSB 20-2382
VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
TSB 20-2047
SEATS
SSM 48430
ELECTRICAL SYSTEM
SSM 48080
ELECTRICAL SYSTEM
SSM 48073
ELECTRICAL SYSTEM
SSM 47682
EQUIPMENT