Technical Service Bulletin SSM 49067 — 2019 FORD FLEX
ELECTRICAL SYSTEM
Bulletin Details
| TSB ID | SSM 49067 |
| Manufacturer | |
| Vehicle | 2019 FORD FLEX |
| Component | ELECTRICAL SYSTEM |
| Communication Date |
Bulletin Summary
Some 2019 Flex vehicles equipped with SYNC 3 without navigation may exhibit a compass that is stuck and/or does not indicate the correct direction. This may be due to the calibration in the accessory protocol interface module (APIM). To resolve the concern, reprogram the APIM using the latest level of the appropriate Ford scan tool. The SYNC 3 universal thumb drive should not be used to correct this condition. For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2019 FORD FLEX
TSB 20-2427
EQUIPMENT
SSM 48482
ELECTRICAL SYSTEM
SSM 48482
EQUIPMENT:ELECTRICAL
TSB-2212
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
SSM 47797
ELECTRICAL SYSTEM
SSM 47571
ELECTRICAL SYSTEM
SSM 47571
EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
SSM 47509
EQUIPMENT