Technical Service Bulletin SSM 48130 — 2018 FORD F-350 SD
VISIBILITY
Bulletin Details
| TSB ID | SSM 48130 |
| Manufacturer | |
| Vehicle | 2018 FORD F-350 SD |
| Component | VISIBILITY |
| Communication Date |
Bulletin Summary
Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2018 FORD F-350 SD
SSM 51947
EQUIPMENT
SSM 51829
EQUIPMENT
21M05
LATCHES/LOCKS/LINKAGES:TAILGATE:LATCH
SSM 50174
ENGINE
TSB 21-2223
POWER TRAIN
SSM 49881
EQUIPMENT
SSM 48539
ENGINE AND ENGINE COOLING
TSB 19-2343
ELECTRICAL SYSTEM
TSB 19-2315
ENGINE AND ENGINE COOLING
SSM 47999
ENGINE AND ENGINE COOLING