Technical Service Bulletin SSM 47937 — 2018 FORD ESCAPE
ENGINE
Bulletin Details
| TSB ID | SSM 47937 |
| Manufacturer | |
| Vehicle | 2018 FORD ESCAPE |
| Component | ENGINE |
| Communication Date |
Bulletin Summary
SSM 47937 - 2019 MKC, 2018-2019 Escape - 2.0L - Auto Start/Stop - No Auto Restart After An Auto Stop Event With DTC P164C Some 2018-2019 Escape vehicles built on or after 01-Aug-2018 or 2019 MKC vehicles equipped with a 2.0L engine may exhibit an auto start/stop, no auto restart concern with diagnostic trouble code (DTC) P164C. A revised crankshaft position sensor (CKP) JX6Z-6C315-B is available. Refer to the Workshop Manual (WSM), Section 303-14A. For claiming, use causal part 6C315 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2018 FORD ESCAPE
SSM 48895
ENGINE
SSM 48895
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
SSM 48858
ELECTRICAL SYSTEM
TSB 20-2171
STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS
19B37-S3
ENGINE AND ENGINE COOLING
SSM 47909
EQUIPMENT
TSB 19-2056
STRUCTURE
SSM 47750
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
SSM 47703
ELECTRICAL SYSTEM
SSM 47575
ELECTRICAL SYSTEM