Technical Service Bulletin SSM 47937 — 2019 FORD ESCAPE
ELECTRICAL SYSTEM
Bulletin Details
| TSB ID | SSM 47937 |
| Manufacturer | |
| Vehicle | 2019 FORD ESCAPE |
| Component | ELECTRICAL SYSTEM |
| Communication Date |
Bulletin Summary
SSM 47937 - 2019 MKC, 2018-2019 Escape - 2.0L - Auto Start/Stop - No Auto Restart After An Auto Stop Event With DTC P164C Some 2018-2019 Escape vehicles built on or after 01-Aug-2018 or 2019 MKC vehicles equipped with a 2.0L engine may exhibit an auto start/stop, no auto restart concern with diagnostic trouble code (DTC) P164C. A revised crankshaft position sensor (CKP) JX6Z-6C315-B is available. Refer to the Workshop Manual (WSM), Section 303-14A. For claiming, use causal part 6C315 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2019 FORD ESCAPE
TSB 21-2077
ELECTRICAL SYSTEM
SSM 48895
ELECTRICAL SYSTEM
TSB-20-2002
POWER TRAIN
TSB-20-2002
ENGINE AND ENGINE COOLING
SSM 48335
TRAILER HITCHES
TSB 19-2265
EQUIPMENT:APPLIANCE:AIR CONDITIONER
TSB 19-2208
ENGINE AND ENGINE COOLING
TSB19-2171
ENGINE AND ENGINE COOLING
TSB 19-2056
STRUCTURE:BODY:HATCHBACK/LIFTGATE
19B02
EQUIPMENT