Technical Service Bulletin SSM 47107 — 2018 FORD FOCUS
EQUIPMENT ADAPTIVE/MOBILITY
Bulletin Details
| TSB ID | SSM 47107 |
| Manufacturer | |
| Vehicle | 2018 FORD FOCUS |
| Component | EQUIPMENT ADAPTIVE/MOBILITY |
| Communication Date |
Bulletin Summary
Some 2018 Focus vehicles may exhibit an inoperative and/or intermittent horn operation. Refer to Workshop Manual (WSM), Section 413-06 for diagnosis. If testing leads to horn replacement, inspect connector C131 for corrosion and repair as necessary, using replacement pigtail 3U2Z-14S411-BXAB or Motorcraft WPT-984. Using Rotunda Technician Tool program (RTTP) NUD105-R025E Flex probe kit or equivalent, verify pin drag on the C131 harness connector terminals. If no corrosion is present, reconnect connector C131 a couple of times and add Motorcraft electrical grease XG-12 or equivalent meeting specification WSB-M1C239-A to both terminals. For claiming, use causal part 13832 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.