Technical Service Bulletin NTB25-001 — 2025 NISSAN ROGUE
FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL
Bulletin Details
| TSB ID | NTB25-001 |
| Manufacturer | |
| Vehicle | 2025 NISSAN ROGUE |
| Component | FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL |
| Communication Date |
Bulletin Summary
CRUISE CONTROL/PROPILOT STOPS WORKING IF YOU CONFIRM The customer states that while driving on an unobstructed road, and on a clear day without any rain, snow, or direct sunlight, the Cruise Control/ProPilot stopped working, AND The Automatic Emergency Braking/Forward Emergency Braking light (AEB/FEB) flashed while the “Forward Driving Aids Disabled” message was displayed in the combination meter, AND DTC C2582-97 for “Distance sensor” is stored as PAST. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Confirm the current LASER/RADAR part number. 2. Reprogram the LASER/RADAR, if applicable. 3. Erase the DTCs. 4. Perform Distance Sensor Alignment. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2025 NISSAN ROGUE
NTB25-046
ELECTRICAL SYSTEM
NTB25-007
ELECTRICAL SYSTEM
NTB25-002
ELECTRICAL SYSTEM
NTB23-064B
ENGINE