Technical Service Bulletin NTB22-020 — 2022 NISSAN ALTIMA
ELECTRICAL SYSTEM:WIRING:SWITCHES/KNOBS/BUTTONS
Bulletin Details
| TSB ID | NTB22-020 |
| Manufacturer | |
| Vehicle | 2022 NISSAN ALTIMA |
| Component | ELECTRICAL SYSTEM:WIRING:SWITCHES/KNOBS/BUTTONS |
| Communication Date |
Bulletin Summary
SERVICE INFORMATION FOR BRAKE SWITCH ADJUSTMENT FOR DTC C1142 AND/OR C1116 STORED SERVICE INFORMATION DTC C1142 (PRESS SEN CIRCUIT) and/or C1116 (STOP LAMP SW) may be stored if the Stop Lamp Switch and/or the Brake Pedal Position Switch are out of adjustment. Before replacing any components for DTCs C1142 (PRESS SEN CIRCUIT) and/or C1116 (STOP LAMP SW), stored as past or current, confirm that the Stop Lamp Switch and the Brake Pedal Position Switch are properly adjusted. If either the Stop Lamp Switch and/or the Brake Pedal Position Switch are found to be out of adjustment, adjust them as per the ESM, and then clear the DTCs and perform DTC confirmation. ï· Refer to the ESM: BRAKES > BRAKE SYSTEM > PERIODIC MAINTENANCE > BRAKE PEDAL > Adjustment
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2022 NISSAN ALTIMA
NTB21-115B
ELECTRICAL SYSTEM
NTB13-027D
ELECTRICAL SYSTEM
PC933 2022 Altim
SUSPENSION
NTB22-102
SUSPENSION
PC891 2022 Altim
SUSPENSION