Technical Service Bulletin NTB15079A — 2010 NISSAN FRONTIER
FUEL SYSTEM, GASOLINE
Bulletin Details
| TSB ID | NTB15079A |
| Manufacturer | |
| Vehicle | 2010 NISSAN FRONTIER |
| Component | FUEL SYSTEM, GASOLINE |
| Communication Date |
Bulletin Summary
IF YOU CONFIRM: The MIL is ON with DTC P0448 (EVAP canister vent control valve close) stored in the ECM. ACTION: 1. Replace the EVAP canister (canister) and EVAP canister vent control valve (vent control valve). 2. Remove the canister filter. 3. Attach the EPT foam seal to fuel filler tube. 4. Replace the fuel filler pipe, canister drain hose, and fuel filler cap (on some model years) listed in PARTS INFORMATION. 5. Erase the DTC. See this bulletin for further detail.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2010 NISSAN FRONTIER
NTB15-079F
ENGINE AND ENGINE COOLING
P7318
SUSPENSION
REV1_P7318
AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE
NTB-10-021
WHEELS
NTB-10-008
SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY