Technical Service Bulletin M1650 — 2017 HARLEY-DAVIDSON FLTRU

SERVICE BULLETIN M1650: MILWAUKEE EIGHT AND TWIN CAM CAMSHAFT DRIVE GEAR RETENTION KIT CHANGES. PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 N·m) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).