Technical Service Bulletin LI32.50-P-075055 — 2019 MERCEDES-BENZ GLE 400
EQUIPMENT ADAPTIVE/MOBILITY
Bulletin Details
| TSB ID | LI32.50-P-075055 |
| Manufacturer | |
| Vehicle | 2019 MERCEDES-BENZ GLE 400 |
| Component | EQUIPMENT ADAPTIVE/MOBILITY |
| Communication Date |
Bulletin Summary
Complaint Malfunction due to the ingress of dirt during the repair of the hydraulic system. Cause Cleaning instructions in WIS are not being sufficiently observed. This can result in dirt entering the hydraulic system of the vehicle or the filling unit. In subsequent filling/emptying procedures, the dirt is then transferred to another vehicle. Remedy Before removing/replacing an electrohydraulic pump unit or the associated hydraulic lines, as well as when removing the electrohydraulic suspension struts, it is essential to thoroughly wash the underbody. If the dust cap is missing/defective and if the filling valve in the interior is contaminated, the surrounding area must be cleaned thoroughly.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2019 MERCEDES-BENZ GLE 400
LI6320P073629
BACK OVER PREVENTION
LI20.40-P-070996
ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN
LI54.21-P-071486
ELECTRICAL SYSTEM:SOFTWARE