Technical Service Bulletin A22010A — 2019 HONDA FIT
FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
Bulletin Details
| TSB ID | A22010A |
| Manufacturer | |
| Vehicle | 2019 HONDA FIT |
| Component | FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM |
| Communication Date |
Bulletin Summary
ServiceNews Article - When diagnosing a Fit within the above VIN range with a misfire complaint, start by doing service bulletin 21-007 (Carbon Buildup with Misfire DTCs) instead of replacing fuel injectors. These vehicles use an improved injector design that addresses the failures that may have occurred in previous model years. In fact, fuel injectors within the above VIN range with misfire complaints were collected and found to have no defects that required part replacement. Replacing those injectors may have reduced the number of misfires temporarily, but most likely didn't address the actual cause of the misfire. The recommended repair for these vehicles is to do the intake valve cleaning procedure described in service bulletin 21-007 (Carbon Buildup with Misfire DTCs).
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2019 HONDA FIT
A20-045
FUEL SYSTEM, GASOLINE
A21-023
FUEL SYSTEM, GASOLINE
A21-007
ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:SEALS/GASKETS
A21-007
FUEL SYSTEM, GASOLINE:STORAGE:EVAPORATIVE EMISSIONS:HOSES/VALVES/SENSORS
A21-007
FUEL SYSTEM, GASOLINE
A20-093
ELECTRICAL SYSTEM
APaS02262020
ENGINE AND ENGINE COOLING
APaS01312020905
ENGINE AND ENGINE COOLING
APaS01162020905
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
APaS01162020905
ENGINE AND ENGINE COOLING