Technical Service Bulletin A22010A — 2018 HONDA FIT
FUEL SYSTEM, GASOLINE
Bulletin Details
| TSB ID | A22010A |
| Manufacturer | |
| Vehicle | 2018 HONDA FIT |
| Component | FUEL SYSTEM, GASOLINE |
| Communication Date |
Bulletin Summary
"Service news article - When diagnosing a Fit within the above VIN range with a misfire complaint, start by doing service bulletin, 21-007 (Carbon Buildup with Misfire DTCs) instead of replacing fuel injectors. These vehicles use an improved injector design that addresses the failures that may have occurred in previous model years. In fact, fuel injectors within the above VIN range with misfire complaints were collected and found to have no defects that required part replacement. Replacing those injectors may have reduced the number of misfires temporarily, but most likely didnât address the actual cause of the misfire. The recommended repair for these vehicles is to do the intake valve cleaning procedure described in service bulletin 21-007, (Carbon Buildup with Misfire DTCs)."
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2018 HONDA FIT
ATI&05032024905
ENGINE
ATI&04152024902
ENGINE AND ENGINE COOLING
ATI&03282024902
ENGINE AND ENGINE COOLING
ATI&02012024904
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR
ATI&02012024904
ENGINE AND ENGINE COOLING
ATI&01172024905
ENGINE AND ENGINE COOLING
ONL6M208142023
ENGINE AND ENGINE COOLING
ABOM06022023906
ENGINE AND ENGINE COOLING
A23-042
ELECTRICAL SYSTEM:SOFTWARE
A23-042
ENGINE AND ENGINE COOLING