Technical Service Bulletin 9003825 — 2016 DODGE DURANGO
SEATS
Bulletin Details
| TSB ID | 9003825 |
| Manufacturer | |
| Vehicle | 2016 DODGE DURANGO |
| Component | SEATS |
| Communication Date |
Bulletin Summary
LATCH, Hood For the following concerns, please verify secondary plunger switch before replacing hood latch with primary switch. Please refer to service information for complete diagnostics of the secondary plunger switch which is located in the left front under hood on RU, MP, and WK/WD and left rear under hood on KL. 1) Electronic Stop Start Message on Cluster or DTC P152F without hood ajar illuminated. 2) KL Hood ajar light is on or unlatched hood due to high closing effort. (KL hood may have a higher closing effort to latch the hood as rubber bumper interference is set purposely high to prevent hood flutter at highway speeds) If stop start message or DTC P152F is present on vehicles without a hood ajar light illuminated, the issue is not related to the primary hood latch switch.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2016 DODGE DURANGO
08-016-23
EQUIPMENT:ELECTRICAL
S2209000004
EQUIPMENT
0810121
EXTERIOR LIGHTING
S1708000055RevA
ENGINE AND ENGINE COOLING
23-018-20 REV. E
SEATS
9003704
FUEL SYSTEM, GASOLINE
S2008000100
EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:120/240 VAC ELECTRICAL SYSTEM:WIRING
S2024000005
STRUCTURE
18-049-20
ENGINE AND ENGINE COOLING
0811119
ELECTRICAL SYSTEM