Technical Service Bulletin 540113 — 2011 BMW 128I

STRUCTURE

Check any vehicle history by VIN - Free vehicle history report

Bulletin Details

TSB ID 540113
Manufacturer
Vehicle 2011 BMW 128I
Component STRUCTURE
Communication Date

Bulletin Summary

"MWhite Wear Marks on Canvas Top. Wear marks appear on the convertible top on the left and/or right side C-pillar areas. A For vehicles produced to December 12, 2011 1. Replace the defective canvas convertible top. Refer to ISTA Repair Instruction 54 34 120, ""Replacing soft top fabric."" Note: The following repair steps must be performed before the new top is installed to prevent a repeat repair for wear marks. 2. With the defective canvas cover removed, the current main pillars must be replaced. Refer to ISTA Repair Instruction 54 34 996, ""Replacing left or right main pillar."" 3. The current locking mechanisms and bump stops must be replaced as well. Refer to ISTA Repair Instruction 54 34 196, "Removing and installing / replacing both stowage locks." The repair kit* needed is listed below. 7. Reinstall the removed parts in the reverse order of their removal. 8. Operate the top several times to quality check the repair."

About Technical Service Bulletins

A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.

Other TSBs for the 2011 BMW 128I

120415 ELECTRICAL SYSTEM
SIB-61-07-13 STRUCTURE:BODY
Check any vehicle history by VIN - Free vehicle history report