Technical Service Bulletin 21-042-24 — 2018 CHRYSLER PACIFICA PLUG-IN HYBRID
ELECTRICAL SYSTEM
Bulletin Details
| TSB ID | 21-042-24 |
| Manufacturer | |
| Vehicle | 2018 CHRYSLER PACIFICA PLUG-IN HYBRID |
| Component | ELECTRICAL SYSTEM |
| Communication Date |
Bulletin Summary
"Internal Transmission Wiring Connector Short and Motor A Bearing Failure Warranty Extension XE1 **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● P0A3F - Drive Motor A Position Sensor 1 Circuit. ● P0A43 - Drive Motor A Position Sensor Circuit Intermittent. ● P0A45 - Drive Motor B Position Sensor 1 Circuit. ● P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ● Vehicle is in limp mode. NOTE: Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: ● Hybrid Control Processor (HCP). ● Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). This bulletin involves replacing the transmission."
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2018 CHRYSLER PACIFICA PLUG-IN HYBRID
21-014-26
ELECTRICAL SYSTEM
08-299-25 REV. A
ELECTRICAL SYSTEM
S2509000001
ENGINE
1802123
POWER TRAIN
1802123
ELECTRICAL SYSTEM
08-130-21
BACK OVER PREVENTION
9003756
ELECTRICAL SYSTEM