Technical Service Bulletin 2053492/6 — 2010 BENTLEY CONTINENTAL GT

SUSPENSION:REAR:SPRINGS

Check any vehicle history by VIN - Free vehicle history report

Bulletin Details

TSB ID 2053492/6
Manufacturer
Vehicle 2010 BENTLEY CONTINENTAL GT
Component SUSPENSION:REAR:SPRINGS
Communication Date

Bulletin Summary

Air spring fault finding. Customer statement / workshop findings: The front and/or rear suspension appears to have dropped. Technical background: The list of Bentley vehicles below are fitted with air springs as part of the suspension system. Should air leak from the air springs, this will cause the suspension to drop. However, the dropping of the suspension does not necessarily mean that the air spring is faulty. TheMeasure section of this TPI describes how and where to check for air leaks on the front and rear air springs, the air pump compressor, pipes, valve unit and air reservoirs. This includes potential air leak points on the air springs and also the locations of an air leak that can be repaired without the need to replace an air spring. These checks should be carried out in conjunction with the Elsapro procedure Air suspension: To check with the use of the special tool Air suspension leak tester VAS 751 001 shown in the image below as item ( 1). Refer to Elsapro, Repair Group 43, Air suspension To check.

About Technical Service Bulletins

A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.

Other TSBs for the 2010 BENTLEY CONTINENTAL GT

2056407/6 SUSPENSION
2043974/2 WHEELS
SB-2033467-1A STRUCTURE:BODY:ROOF AND PILLARS
Check any vehicle history by VIN - Free vehicle history report