Technical Service Bulletin 2033170/4 — 2011 BENTLEY CONTINENTAL GTC
ELECTRICAL SYSTEM
Bulletin Details
| TSB ID | 2033170/4 |
| Manufacturer | |
| Vehicle | 2011 BENTLEY CONTINENTAL GTC |
| Component | ELECTRICAL SYSTEM |
| Communication Date |
Bulletin Summary
Air Bag Warning - Resistance Related Fault Codes. Condition: Air bag warning displayed. Service: To be applied to applicable cars exhibiting fault codes as detailed above. Although the fault codes may only be appertaining to one side of the car at the time of complaint the new harness must be fitted in its entirety, integrated into both the drivers and front passengers seat belt real assembly. The procedure consists of electrically disconnecting the original wires connecting the air bag control module to the front seat belt reels. This is done by cutting off the ends of the connectors at the seat belt reel end and de-pinning the main connector housing at the control module end, the redundant wires are then taped back into the main harness. The new harness is then connected to the components and secured to the main harness.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2011 BENTLEY CONTINENTAL GTC
2033467/2
STRUCTURE
2033467/2
VISIBILITY:SUN/MOON ROOF ASSEMBLY
2058465/1
STRUCTURE
SB-2033508-1A
EQUIPMENT ADAPTIVE/MOBILITY