Technical Service Bulletin 1HD-D8A8J-03 — 2016 HARLEY-DAVIDSON FLHTKSE
POWER TRAIN:CLUTCH ASSEMBLY
Bulletin Details
| TSB ID | 1HD-D8A8J-03 |
| Manufacturer | |
| Vehicle | 2016 HARLEY-DAVIDSON FLHTKSE |
| Component | POWER TRAIN:CLUTCH ASSEMBLY |
| Communication Date |
Bulletin Summary
SERVICE BULLETIN M1359: 2014 - 2016 TOURING - HYDRAULIC CLUTCH LINE REPLACEMENT. PURPOSE: REVISION. A leak may occur on some Touring, CVO Touring, Police Touring and Trike models equipped with hydraulic clutch. The leak may occur when the line is replaced or when a P&A clutch line is installed. The area of the leak is at the joint where the clutch line attaches to the secondary clutch actuator (right side of the transmission). Required Dealer Action: Use Snap-on Flare Nut Socket (Part No. GAN85087B) and Snap-on Torque Wrench (Part No. QJR117F or similar) to tighten flare nut. Each time clutch line is installed or torque is adjusted to determine if leak is still present, bleed the clutch system.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2016 HARLEY-DAVIDSON FLHTKSE
TA0016
STRUCTURE
1HD-F6Q5V-04
STEERING: STEERING WHEEL/HANDLE BAR
1HD-Y6J2F-02
ELECTRICAL SYSTEM:SOFTWARE
M1409A
SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM