Technical Service Bulletin 19-AT-023G — 2024 GENESIS G80
POWER TRAIN
Bulletin Details
| TSB ID | 19-AT-023G |
| Manufacturer | |
| Vehicle | 2024 GENESIS G80 |
| Component | POWER TRAIN |
| Communication Date |
Bulletin Summary
If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2024 GENESIS G80
25-BE-014G TSB
UNKNOWN OR OTHER
25-01-019G-1 TSB
UNKNOWN OR OTHER
P09G_OL
UNKNOWN OR OTHER
24-01-053G
UNKNOWN OR OTHER