Technical Service Bulletin 1804221 — 2016 JEEP RENEGADE

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure. P1523-00 - VVA Low Oil Pressure. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0141 - O2 Sensor 1/2 Heater Performance. Some customers may experience one or more of the following conditions: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(2016 BU EMEA only). Cruise control will not set at 32 kph (20 mph). Engine cranking times out after five seconds. Cruise control will not engage at highway speeds and when in 6th gear. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle (EMEA and APAC only). The following enhancements are also included: Improved purge sensor performance. Updated fuel strategy to inhibit spark plug fouling.