Technical Service Bulletin 08-408-25 — 2025 CHRYSLER PACIFICA PLUG-IN HYBRID
ELECTRICAL SYSTEM
Bulletin Details
| TSB ID | 08-408-25 |
| Manufacturer | |
| Vehicle | 2025 CHRYSLER PACIFICA PLUG-IN HYBRID |
| Component | ELECTRICAL SYSTEM |
| Communication Date |
Bulletin Summary
Flash: Power Inverter Module (PIM) Flash Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P16F0-00 - SPI Comm Hardware Fault. ● P16F1-00 - Internal SPI Communication. Customers may experience the following: ● Vehicle may lose propulsion capability upon entering Ready Mode. ● Vehicle may lose propulsion while driving in electric mode. Prior to that, a warning message will appear in the cluster informing them to stop safely because the vehicle will be shutting down soon. After shutting down, the vehicle may not be able to start again. Failure may occur between driving cycles and may not start after trying to turn it on for the first time during a day. This bulletin involves reprogramming the Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM), with the latest available software.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2025 CHRYSLER PACIFICA PLUG-IN HYBRID
08-010-26
SERVICE BRAKES
OTHERDOC_143
ELECTRICAL SYSTEM
23-023-25
STRUCTURE:BODY
19-003-25 REV. B
STEERING
103952
STRUCTURE:BODY