Technical Service Bulletin 04584559A$ — 2013 DODGE CHARGER
STEERING
Bulletin Details
| TSB ID | 04584559A$ |
| Manufacturer | |
| Vehicle | 2013 DODGE CHARGER |
| Component | STEERING |
| Communication Date |
Bulletin Summary
Steering Gears, Pumps and Hoses This tech tip applies to vehicles built before 12-23-2010, these vehicles can exhibit a squeak or rubbing noise when turning the steering wheel. Do not replace the steering gear, steering pump, power steering pressure hose or power steering return hose before investigating the dash seal ring. The source of the noise may be the sealing ring under the dash seal. To correct the issue apply MOPAR product part number 04318070AD (Silicone Spray Lube) to the inner dash seal interface and also the outer engine compartment interface. Do not use any alternate lubricants. If MOPAR product part number 04318070AD (Silicone Spray Lube) is not available then replace the assembly. Refer to TSB 08-091-14.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2013 DODGE CHARGER
18-073-20
ELECTRICAL SYSTEM
1807320
POWER TRAIN
1808816
POWER TRAIN
18-088-16B
POWER TRAIN
18-088-16 REV. A
POWER TRAIN
18-088-16 REV. A
ENGINE AND ENGINE COOLING
R8149638A$
SUSPENSION
R8149638A
POWER TRAIN
08-033-15 REV B
ELECTRICAL SYSTEM
18-074-15
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)