NHTSA Complaint #11696498 — 2022 FORD BRONCO

I am writing to formally report a safety-related malfunction involving the parking brake system in my vehicle. The issue poses a significant safety hazard while driving and warrants investigation for potential design or manufacturing defects. During normal operation, the parking brake actuator malfunctioned, causing the vehicle to pull to one side and creating an unsafe driving condition. When I took the car to an authorized dealership, I was informed that the issue was due to a faulty parking brake switch. The switch was replaced; however, the malfunction persisted. Further inspection revealed that the parking brake motor and actuator needed replacement. Even after these repairs, while driving, the dashboard repeatedly displayed warnings such as: •“Parking brake engaged,” •“Please release parking brake,” and •“Parking brake system overheated.” When attempting to release the brake, the system would only disengage after manually pressing the release button, rather than automatically disengaging when the vehicle began to move — as it should. This malfunction not only causes confusion but also increases the risk of loss of vehicle control or brake system failure during operation. Given the repeated failures and persistent warnings, I believe this issue represents a potential safety defect that should be reviewed by your agency to determine if other vehicles are affected. Thank you for your attention to this matter. I look forward to your response and to ensuring this issue is properly addressed to prevent future incidents.