NHTSA Complaint #11601445 — 2006 TOYOTA HIGHLANDER

Two problems being reported are severe safety issues, and could result in injury, death, and/or property damage. Problem 1: While driving, the brake pedal suddenly went all the way to the floor, and the car would not stop. To avoid hitting the car in front at a stop sign, I had to turn the wheel, resulting in running through the stop sign and onto the grass and shoulder before the car finally stopped. Multiple dashboard warning lights appeared. After stopping, the brakes momentarily returned but failed again within 2-3 minutes. A loud, high-pitched, piercing whistle sound began, indicating a complete loss of brakes. The car had to be towed 200 miles back home. It is not safe to drive the car without functioning brakes. The OBD scan codes are: C1256 (accumulator low pressure), C1391 (abnormal leak of accumulator pressure), and C1256 (accumulator low pressure). Problem 2: When starting the car, the brakes are applied first, and then the car is placed in gear. The car involuntarily and immediately jumps forward or backward and continues to move, even though the brakes are being applied. Having the foot on the brakes has NO EFFECT on the car moving! The car should not move at all when the brakes are being applied. To stop the movement, I must quickly pump the brakes repeatedly. This occurs every time the car is placed into gear after starting the engine, causing it to jump forward or backward and continue moving despite brake application. Both problems are severe safety issues, and could result in injury, death, or property damage.