NHTSA Complaint #11589107 — 2016 MERCEDES-BENZ CLA250

I HAVE 2 MECEDES WITH THE SAME ISSUE PER MERCEDES BENZ OF USA INSPECTION CAUSING ENGINE LIGHT TO BE TRIGGERED PER DIAGNOSIS TESTING RAN ON BOTH CARS. 2015 VIN [XXXXX] GLA 250 4 MATIC-P052E71 2016 VIN [XXXXX0 2013 CLA 250 MATIC -P052E71 I WAS TOLD BY A MERCEDES SERVICES ADVISIOR THAT BOTH CARS HAVE THE SAME ENGINE FOR A 2015GLA AND A 2016 CLA - BOTH Due to both cars stalling in traffic on multiple time when driving I took both to the shop to run further testing to discover both had the same engine light trigger which is the CRANKSHAFT (AKA) OIL SEPERATOR (AKA)INTAKE TUBE DUE TO THIS BOTH CARS HAVE SUFFERED AN ISSUE WHEN TAKING EMMISSION TEST - MERCEDES DIGNOSIS TESTING CODES -P052E71 - CRANKSHAFT VENILATION MALFUNCTION - CAR WILL NOT PASS EMMISSION TEST AND THIS PART DEFECTS ALSO CAUSES CAR TO STALL THAT CAN POSSIBLE CAUSE ACCIDENT THIS PART COMPLETE REPAIR COULD COST UP TO $2500-$3000 FOR PARTS AND LABOR PART NUMBER -270-090-07-00 (CRANKSHAFT) THE ENGINE LIGHT ISSUE TRIGGERED BY CRANKSHAFT AND WILL NOT PASS EMMISSION TESTING DUE TO THIS Description of this part below: Crankcase Ventilation is the process of venting or removing blow-by from an engine's crankcase to prevent excessive pressure build-up within the engine. Blow-by gases are mixed with oil mist and other contaminants that can harm an engine's internal components and contaminate the environment. How does the crankshaft ventilation work- When the vehicle is moving, airflow across the open end of the tube creates suction (a "draught" or draft) that pulls gases out of the crankcase. To prevent too much vacuum being created, the blow-by gases are replaced by fresh air using a device called a breather. The breather is often located in the oil cap the engine misfires, you may have trouble getting your vehicle up to speed. Misfires often happen when your vehicle is under load while accelerating. This can result in slow or sluggish acceleration or a jerking motion while pressing down on acc