NHTSA Complaint #11491071 — 2021 MAZDA CX-5

At 16,550 miles (5675 miles since the last oil change), my oil pressure light came on. Per owner's manual, I turned the car off & let the oil drain into the pan for 5 minutes. I checked the oil but due to it being so hot it was hard to get an accurate reading. I turned the car back on & the oil light was off. I proceeded to drive into town and 25 miles later the light came on again. I checked the oil & it appeared to be very low. I added a quart of oil and the light went off. I checked the oil level later when the car was cool & the oil level on the dipstick was now halfway between the 2 dots on the dipstick. I drove about 300 miles home from our trip and the light never came back on. I took it to the dealership the next day & the technician said no codes showed that my oil level was low and they said my oil level was now 2 Qts too high. I only added 1 and they changed it last. Even though I was told there was a known issue involving a valve stem seal, they told me Mazda will not authorize the repair unless the engine code error is present (P205F?) & the low oil light is on. They were unable to explain why my low oil light came on. I was told that I need to change my oil every 5k miles even though the owner's manual says I can go up 7500 miles. They also told me that I should wait 10-15 minutes to let the oil drain after shutting the car off and not the 5 minutes that it states in my owner's manual. They told me if this issue happens again, to have my car towed to the nearest Mazda dealership. However, again the repair would only be done if both conditions were present. A bulletin had been produced on this issue but not provided to the owners of the vehicles. This is a safety risk since I was on a trip and would never imagine having this issue with a new car 1year old. Had I known this was an issue, I could have been more prepared. Potentially letting oil continue to seep into the combustion chamber of my engine is not ok.