NHTSA Complaint #11467019 — 2013 KIA RIO

On 04/07/22, I took my vehicle into Covina Valley KIA to replace a fuel line that had melted being constructed too close to the engine. About a month before the line, I noticed smoke was coming from under the hood. Other parts were too close to the GDi engine and were melting, and/or burning. For instance, the ignition coil/engine wire(s) cluster plastic holder which is mounted on the engine, was melting, breaking, and burning. Also the foam from the engine cover had caught fire. My car had also been throwing a knock sensor code p0326 every year. Replace it each time. Then the last time I fixed it, I got another p0326 that changed into fuel too rich code p2192. I inquired to KIA Management about the 2015 Service Bulletin: SB-10089747-5448 concerning the constant codes. But manager said that a ECU Upgrade may not help and to come down just to clear the codes to see if that helped. The car has been maintained, oil/filter changes 3,000 miles and I am the second owner. But these problems occurred without warning. Bad manufacturing, had to also replace the Fuel Pressure Regulator Valve, Fuel Feed Pipe, and all four Injectors due to melted plastic making it into the Delivery Rail from the melted Fuel Line which is plastic. Will attached my service bill and main receipts for parts bought to rectify this problem.