NHTSA Complaint #11419802 — 2007 TOYOTA FJ CRUISER

Due to rust on my 2007 FJ Cruiser, I've had many unexpected expenses. I first was losing brake pressure and my brake lines had to be replaced after breaking when in a mechanic's shop. I've also replaced all four calipers, all the rusted pulleys on the engine, lower control arms that were so rusted that they had to be cut out, and hub assemblies for both front wheels. The hub assembly lead to a failed vehicle inspection for safety concerns. The exhaust pipe literally broke apart near the rear frame crossmember and was sitting on it, so had to be replaced. The exhaust manifold rusted apart and separated from the engine block, leading to dangerous fumes in the engine bay and horrible gas mileage. The O2 sensors were rusted in place and giving poor readings and had to be replaced. Turning the steering wheel became difficult and that was due to being extremely rusty, so it had to be replaced. Shifter cable and PRNDL switch had to be replaced due to not shifting into drive or lower gears. The front differential drain plug was so rusted that the dealership would not attempt to remove it. Now there are holes rusted through the body mount brackets, as well as the passenger side floor. The cargo area's floor where the charcoal EVAP canister connects to the vehicle has completely rusted through, and one of the subframe brackets rusted so badly that it was taken off by hand. Both subframe brackets need to be replaced. The rear control arm mounts are very thin due to extreme rust. My mechanic is now replacing coolant lines because they have rusted through and started to leak, and gas tank straps which were on the verge of failing.