2007 ALTEC AT37-G — Problems, Recalls & Safety Data
N/A
Safety Rating
0
Owner Complaints
1
Recall
1
Service Bulletin
0
Investigations
Overview of the 2007 ALTEC AT37-G
The 2007 ALTEC AT37-G has received a total of 0 safety complaints filed with the National Highway Traffic Safety Administration (NHTSA). There has been 1 recall campaign affecting this vehicle, covering issues with EQUIPMENT. 1 technical service bulletin have been issued by ALTEC INDUSTRIES INC. for this model year.
Recalls for the 2007 ALTEC AT37-G
NHTSA has recorded 1 recall for the 2007 ALTEC AT37-G, potentially affecting up to 8,600 vehicles.
Recall 10V598000 — EQUIPMENT
| 8,600 vehicles affected
Defect: ALTEC IS RECALLING CERTAIN MODEL YEAR 1998-2008 AERIAL DEVICES VEHICLES BUILT FROM JANUARY 1998 THROUGH MAY 2008. THE GLUE BOND JOINT IN THE INSULATING ARM LINK MAY FAIL OVER TIME. THE CONNECTION IS ALSO SECURED BY EIGHT BOLTS, BUT WITH THE LOSS OF THE GLUE BOND, THE FASTENERS COULD FATIGUE OVER TIME AND FAIL.
Consequence: FAILURE OF THE GLUE BOND AND FASTENERS COULD RESULT IN SEPARATION OF THE FIBERGLASS LINK FROM THE STEEL INSERTS. AS A RESULT, THE PLATFORM ON WHICH A SERVICE TECHNICIAN WOULD STAND COULD FAIL DURING USE RESULTING IN DEATH OR SERIOUS INJURY.
Remedy: ALTEC WILL PROVIDE INSTRUCTIONS ON HOW TO INSPECT THE FIBERGLASS INSULATING LINK AND FASTENERS. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 1, 2010. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.
View full details →Owner Complaints for the 2007 ALTEC AT37-G
No complaints have been filed with NHTSA for the 2007 ALTEC AT37-G.
Safety Rating for the 2007 ALTEC AT37-G
NHTSA has not yet tested the 2007 ALTEC AT37-G in its New Car Assessment Program.
Technical Service Bulletins for the 2007 ALTEC AT37-G
ALTEC INDUSTRIES INC. has issued 1 technical service bulletin (TSBs) for the 2007 ALTEC AT37-G. TSBs are notices sent by manufacturers to their dealers describing a known issue and the recommended repair procedure.
SIL 3033 — EQUIPMENT
Altec has learned that on certain AT37-G aerial devices built from November 2007 to April 2018, the rear torsion bar swing arm can interfere with the long runner channels under the body as the torsion bar rotates during road travel. The interference can cause wear issues and can cause welds...
NHTSA Investigations for the 2007 ALTEC AT37-G
There are no NHTSA defect investigations on record for this vehicle.
Other Model Years of the ALTEC AT37-G
- 2002 ALTEC AT37-G — 0 complaints
- 2003 ALTEC AT37-G — 0 complaints
- 2004 ALTEC AT37-G — 0 complaints
- 2005 ALTEC AT37-G — 0 complaints
- 2006 ALTEC AT37-G — 0 complaints
- 2007 ALTEC AT37-G (current)
- 2008 ALTEC AT37-G — 0 complaints
- 2009 ALTEC AT37-G — 0 complaints
- 2010 ALTEC AT37-G — 0 complaints
- 2011 ALTEC AT37-G — 0 complaints
- 2012 ALTEC AT37-G — 0 complaints
Other ALTEC Models
- ALTEC AT200A — 3 total complaints
- ALTEC AERIAL DEVICE — 1 total complaint
- ALTEC 4300 — 0 total complaints
- ALTEC 470 KNUCKLE BOOM CRANE — 0 total complaints
- ALTEC 4700 — 0 total complaints
- ALTEC 4900 — 0 total complaints
- ALTEC 7300 — 0 total complaints
- ALTEC 7400 — 0 total complaints