Technical Service Bulletin SIL 795 — 2006 ALTEC DIGGER DERRICK
STRUCTURE
Bulletin Details
| TSB ID | SIL 795 |
| Manufacturer | |
| Vehicle | 2006 ALTEC DIGGER DERRICK |
| Component | STRUCTURE |
| Communication Date |
Bulletin Summary
Some customers have reported cracks occurring in the stationary frame tubes above the chassis frame rails of some HD35A pressure diggers built from 2005 through 2020. Investigation has shown this to be caused by improper orientation of the spacer blocks welded to the bottom of the stationary frame tubes. Altec requires the stationary frame on each unit to be inspected no later than the next preventive maintenance interval. If the inspection shows that the spacer blocks are oriented incorrectly, the unit must be repaired no later than 30 days after the inspection using the Repair Procedure provided in the notification.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.