Technical Service Bulletin SIL 3038 — 2020 ALTEC PRESSURE DIGGER
EQUIPMENT
Bulletin Details
| TSB ID | SIL 3038 |
| Manufacturer | |
| Vehicle | 2020 ALTEC PRESSURE DIGGER |
| Component | EQUIPMENT |
| Communication Date |
Bulletin Summary
Altec has learned that output drive sleeve on certain HD35A pressure diggers built from May 2020 to January 2021 may fail suddenly during use, generating a large quantity of debris in the auger transmission gearbox. If the unit is not shut down immediately, if this failure occurs, this debris can contaminate other components throughout the hydraulic system, causing major additional damage. The customer should contact Altec Shop Service within 30 days of receiving this notice to schedule the output drive sleeve to be replaced as soon as this can be performed at an Altec facility. While awaiting the repair, advise all unit operators that if they hear any loud grinding or other unusual noises from the auger transmission gearbox or notice the kelly bar has suddenly started drifting, they must stow the unit immediately and take it out of service.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.