NHTSA Complaint #11669452 — 2018 HYUNDAI SANTA FE

Q: What component or system failed or malfunctioned, and is it available for inspection upon request? A: Two fuel injectors on bank 2 are failing intermittently causing the engine light to flash and stay on (P0300 errors) and the car loses power.  Q: How was your safety or the safety of others put at risk? A: Driving to Newark airport on [XXX] the car suddenly lost power and was quickly coming to a halt. LUCKILY I was was in the middle lane and was able to get to the shoulder without incident. This also happened to my daughter when she was in WA state, driving to work on the highway (the car was serviced but the fuel injectors were not replaced - see attached receipt). Q: Has the problem been reproduced or confirmed by a dealer or independent service center? A: Yes. An independent service center performed a injector value load test which determines the amount of blocked pressure the injector is performing under load. The values and the math show that more than 1 injector on bank 2 are failing. Q: Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? A: I had the vehicle in the Hyundai dealer but they did not do the injector load test and only wanted to replace all the coil packs and plugs. I had two other independent service facilities confirm the issue is with fault fuel injectors. Hyundai has the parts on hold and is not releasing any due to this issue. I do NOT understand how this is not a recall circumstance. I am fortunate that in both instances an accident did not occur. Q: Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? A: Yes, the engine light comes on - at first blinking, then steady. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)