NHTSA Complaint #11447490 — 2005 HONDA CR-V

My driver power window switch melted and failed in the same way described in the current recall for the same model and year vehicle, just not under the SHS vin numbers that are covered. I suspect this recall should cover more cars than previously thought. I noticed this problem after heavy rains, first my windows stopped rolling up and down, then I began noticed a burring/melting plastic smell coming from the drivers door. I took the door apart and tracked the smell down to the power master switch. After inspecting the switch, it was indeed the switch that melted on the circuit board. It seems to have damaged the driver wiring door harness as well, also like the current recall states. All just as described in the current safety recall which I have attached below. **Safety Recall: 2002-06 CR-V Driver’s Power Window Switch (Only VINs that start with SHS) ''under severe conditions, water or other liquid may enter the driver’s window and reach the power window master switch on the door panel. Liquid in the switch can damage the switch’s printed circuit board (PCB), causing the switch to fail. In rare cases, the damaged PCB creates a short circuit that overheats the switch connectors and melts them, leading to a possible fire.'' All affected vehicles, even those previously repaired under S/B 12-067, must have the driver's power window switch replaced under the current recall.