NHTSA Complaint #10650634 — 2013 CAN-AM SPYDER RT

NOTICED BAD FUEL SMELL FROM DAY ONE OF OWNING THE SPYDER. WOULD LEAVE OUTSIDE WHILE IT COOLED OFF OR PUT A BOX FAN ON IT TO BLOW THE VAPORS OUT OF THE GARAGE. IN AUGUST OF 2013 I NOTICED THE BRAKE LIGHTS STAYING ON, REMOVED SIDE PANEL TO FINED THE WIRES MELTED AND SHORTED TOGETHER. I ALSO NOTICED THE PLASTIC ON THE MASTER CYLINDER SHOWED SIGNS OF MELTING AND OF GETTING HOT. I REPAIRED THE WIRES WITH HIGH TEMPERATURE ELECTRICAL TAPE. I RECEIVED A SAFETY RECALL NOTICE FROM BRP IN SEPTEMBER FOR HEAT RELATED PROBLEMS. THE DEALER FOUND THE FUEL EVAPORATOR CANISTER ALMOST BURNED THROUGH, IT WAS REPLACED AND COVERED IT WITH TIN FOIL HEAT SHIELD. THE DEALER DID NOT THINK THE BRAKE MASTER CYLINDER WAS MELTED BAD ENOUGH TO WARRANT CHANGING AND COVERED IT WITH TIN FOIL HEAT SHIELD. I HAD THEM TO LEAVE THE WIRING AS I HAD ALREADY REPAIRED IT. THE BAD FUEL SMELL CONTINUED WITH THE NEW FUEL EVAPORATOR CANISTER AND THE FUEL BOILS WHERE YOU CAN HEAR IT AFTER A RIDE. IF YOU LOOK UNDER THE SPYDER AFTER A RIDE YOU CAN SEE FUEL VAPORS SPEWING AND DRIPPING FROM THE VENT LINE, AND IT WILL CONTINUE FOR MAYBE AN HOUR OR LONGER. IT IS SOMETIMES HARD TO PUT FUEL IN BECAUSE IT MAKES THE GAS PUMP NOZZLE KEEP CUTTING OFF. *TR